PLANET WNAP-7350 User Manual

Page 22

Text mode
Original mode

User Manual of WNAP-7350

-15-

Step 4. Plug the other waterproof kit to the WAN/LAN port to complete the installation.

Figure 3-4

Step 4a. Pole Mounting:
(a.1) Attach the mounting bracket to the back of the device by using four screws and flat washers.
(a.2) Assemble the M bracket on the outside of the mounting bracket by using four screws and flat washers.
(a.3)Install the antenna assembly against the pole by using the toothed bracket, and then tighten it by four long
screws.

Figure 3-5

Pole diameter less than 5cm may require the use

※

of hex nuts to lock the long screws to

the suitable location.

This manual is related to the following products:

WNAP-6350