PLANET WNAP-7350 - Manual (Page 41)

User Manual of WNAP-7350
-34-
Figure 5-3-12
Step 5. Apply the settings, and connect your WAN port of the Wireless AP to the internet by Ethernet cable.
Step 6. In a remote computer, enter the DDNS host name as the figure is shown below. Then, you should
beable to login the WNAP-7350 remotely.
Please remember to enter the remote management port number that you have configured in Step 3.
Figure 5-3-13
You can go to My Devices page of Planet DDNS website to check if the “Last Connection IP” is displayed.
This indicates your DDNS service is working properly.
Figure 5-3-14
5.3.2.3. UPNP Settings
Select “Enable” to enable the UPNP function.