PLANET WNAP-7350 - Manual (Page 72)

User Manual of WNAP-7350
-65-
 Comment Help identify the routing
 Dynamic Routing
Protocol
Enable or disable the RIP (Routing Information Protocol) for the
WAN or LAN interface.
It supports RIP v1 and v2.
5.5.5 IPv6
Use this section to configure your IPv6 Connection type. If you are unsure of your connection method, please
contact your Internet Service Provider.
Figure 5-5-13
The page includes the following fields:
Object Description
 IPv6 Connection Mode
Choose the mode to be used by the AP/Router to the IPv6 Internet.
There are 7 connection modes available:
Static, SLAAC, DHCPv6, 6to4 Tunnel, 6in4 Tunnel, PPPoE, and
Pass Through.
 DNS Address Server
Setting
Enter the IPv6 Primary DNS & IPv6 Secondary DNS to this section.
 Prefix Delegation Enter the IPv6 Prefix Delegation information provided by your