Ap bridge (ap+wds) – PLANET WNAP-7350 User Manual
Page 44
User Manual of WNAP-7350
-37-
1. Connect the LAN port of the WNAP-7350 to the POE port of the PoE Injector over an Ethernet cable.
2. Connect the DSL/cable modem to the WAN port of the WNAP-7350.
3. Plug one end of the power cord into the PoE Injector, and the other end in electrical socket.
4. Go to “Advanced-> Operation Mode” to configure it in AP Router Mode.
Figure 5-3-18
In this mode, the LAN2 of the WNAP-7350 works as the WAN port.
To configure the Wireless Settings of AP Router Mode, please refer to the section
5.3.3.2.
AP Bridge (AP+WDS)
In the Access Point mode with WDS function, the WNAP-7350 functions likes a central connection for any
stations or clients. Stations and clients must configure the same SSID and Security Password to associate within
the range. The WNAP-7350 supports 2 different SSIDs to separate different clients at the same time.