PLANET WNAP-6308 - Manual (Page 74)

User Manual of WNAP-6308
-64-
The page includes the following fields:
Object Description
 Destination The IP address of packets that can be routed.
 Type
Defines the type of destination. ( Host: Signal IP address / Net: Portion
of Network )
 Gateway Defines the packets destination next hop
 Interface Select interface to which a static routing subnet is to be applied
 Comment Help identify the routing
 Dynamic Routing
Protocol
Enable or disable the RIP (Routing Information Protocol) for the
WAN or LAN interface.
It supports RIP v1 and v2.
5.5.5 IPv6
Use this section to configure your IPv6 Connection type. If you are unsure of your connection method, please
contact your Internet Service Provider.
Figure 5-62 IPv6