2 starting setup in the web ui, Starting setup in the web ui, Igure – PLANET WNAP-6308 User Manual

Page 28: Ailed result of, Ing command, Ogin by default, Address

Text mode
Original mode

User Manual of WNAP-6308

-18-

Figure 4-4 Failed result of Ping command

If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some
firewall software programs may block a DHCP request on newly installed adapters.

4.2 Starting Setup in the Web UI

It is easy to configure and manage the WNAP-6308 with the web browser.

Step 1. To access the configuration page, open a web-browser and enter the default IP address

http://192.168.1.1

in the web address field of the browser.

Figure 4-5 Login by default IP address

After a moment, a login window will appear. Enter

admin for the User Name and Password, both in lower case

letters. Then click the

OK button or press the Enter key.