Igure, Lanet, Ddns – PLANET WNAP-6308 User Manual

Page 42: Ettings, Emote, Anagement, Ccess, Etting, Tatic, Ogin through

User Manual of WNAP-6308

-32-

Figure 5-16 Planet DDNS Settings

Step 3. Go to “Advanced-> Firewall Settings-> Firewall” to allow remote access from WAN port.

Figure 5-17 Remote Management Access Setting

Step 4. Go to “Advanced-> Network Settings-> WAN” to configure WAN Connection using Static (Fixed IP).

Figure 5-18 WAN - Static

Step 5. Apply the settings, and connect your WAN port of the Wireless AP to the internet by Ethernet cable.

Step 6. In a remote computer, enter the DDNS host name as the figure is shown below. Then, you should be

able to login the WNAP-6308 remotely.

Please remember to enter the remote management port number that you have configured in Step 3.

Figure 5-19 Remote Login through DDNS domain