PLANET WNAP-6308 - Manual (Page 60)

User Manual of WNAP-6308
-50-
The page includes the following fields:
Object Description
 QoS Setup Select Enable to enable the QoS function.
 Upload Bandwidth
Set the limit of total upload bandwidth in kbits. To disable
upload bandwidth limitation, input ‘0’ here.
 Download Bandwidth
Set the limit of total download bandwidth in kbits. To disable
download bandwidth limitation, input ‘0’ here.
 Target Set the target of QoS rule.
 Source IP
Specify the local (source) IP address that will be affected by
this rule. Please input the starting IP address in the left field,
and input the end IP address in the right field to define a range
of IP addresses, or just input the IP address in the left field to
define a single IP address.
 Destination IP
Specify the remote (destination) IP address that will be affected
by this rule. Please input the starting IP address in the left field,
and input the end IP address in the right field to define a range
of IP addresses, or just input the IP address in the left field to
define a single IP address.
 Application Select the pre-defined application for this rule.
 Protocol
Please select the protocol type of this rule. If you don’t know
what protocol your application uses, please try ‘TCP’ first, and
switch to ‘UDP’ if this rule doesn’t seems to work.
 Ports Fill out the ports for this rule.
 Number of Bytes Fill out the maximum number of bytes for this rule.
5.4.6 Content Filtering
There are two types (Webs URL Filter Settings and Web Host Filter Settings) of content filtering.