PLANET WNAP-6308 - Manual (Page 51)

User Manual of WNAP-6308
-41-
After getting the IP assigned by the WNAP-6308, ping the DNS server to check whether internet connection is
reachable.
5.3.3.4. Client Bridge (Slave AP Bridge)
In the Client Bridge mode, the WNAP-6308 functions like a wireless adapter. Connect to an Access Point
wirelessly and surf Internet whenever you want. Using Site Survey to scan all the Access Points within the
range and configure its SSID and Security Password to associate with it.
Figure 5-37 Topology – Client Bridge Mode
1. Connect the LAN port of WNAP-6308 to the POE port of the PoE Injector over an Ethernet cable.
2. Connect the PC to the LAN port of the PoE Injector over an Ethernet cable.
3. Plug one end of the power cord into the PoE Injector, and the other end in electrical socket.
4. Go to “Advanced-> Operation Mode” to configure it to Client Bridge mode.
Figure 5-38 Operation Mode – Client Bridge
To configure the Wireless Settings of Client Bridge Mode, please refer to the section 5.6 Wireless Settings .
5.3.4 Advanced – System Log
Choose menu “Advanced-> System Log” to view the logs of the Wireless AP.