PLANET ICA-W7100 - Manual (Page 49)

720P Wireless IR PT IP Camera
ICA-W7100
- 49 -
3.8.1 System Update
To update the firmware online, click “ Select file…” to select the firmware. Then click “Remote
Upgrade” to proceed.
1. Downloading of the firmware procedure cannot be interrupted. If the power
and/or network connection are broken during the download procedure, it might
possibly cause serious damage to the device.
2. User must make sure that the firmware only applies to this device. Furthermore,
do not try to upgrade new firmware if not necessary.
3.8.2 Reboot System
The device is restarted without changing any of the settings.
3.8.3 Factory Default
Restore the device to factory default settings. Note that clicking this button will reset all devices
parameters to the factory settings (including the IP address).
3.8.4 Backup
Recovery
Click the “Recovery” button to locate the saved backup file and open
the backup file. The settings will be restored to the previous
configuration.
Backup
Click this button to back up all of the parameters. If necessary, it will be
possible to return to the previous settings if settings are changed and
there is unexpected behavior.