PLANET ICA-W7100 - Manual (Page 40)

720P Wireless IR PT IP Camera
ICA-W7100
- 40 -
Step 3: If the wireless AP has the encryption key, please input the correct password. If the
wireless AP doesn’t have the encryption key, please keep it as blank.
Step 4: Click the “Setup” button to save change.
Step 5: Remove IP camera’s Ethernet cable. IP camera will connect to the wireless AP via
wireless.
Step 6: If wireless AP supports Wireless Client Table function, user is able to check the
connection status via the function.
3.6.3 Port Management
User may need to assign a different port to avoid conflict when setting up IP assignment
TCP Port Choose the TCP port.
HTTP Port
Set up web page connecting port and video transmitting port (Default:
80).
RTSP Port
Choose the RTSP port. The RTSP protocol allows a connecting client to
start a video stream. Enter the RTSP port number to use. The default
value is 554.
ONVIF Port
Choose the ONVIF port. ONVIF is a global and open industry forum with
the goal to facilitate the development and use of a global open standard
for the interface of physical IP-based security products. In other words, it
creates a standard for how IP products within video surveillance and other
physical security areas can communicate with each other.
3.6.4 PPPoE Setting
z PPPoE stands for Point to Point Protocol over Ethernet
A standard that builds on Ethernet and Point-to-Point network protocol, it allows Internet