PLANET ICA-W7100 - Manual (Page 38)

720P Wireless IR PT IP Camera
ICA-W7100
- 38 -
Search Wi-Fi
Device
Here it shows all wireless access points found by this IP camera. Please
note not all access points will be displayed at the same time. If the
access point you expected to connect does not appear, you may have to
click the
“Refresh” button for several times until it appears.
The description of all fields is listed below:
ESSID: The ESSID of all found wireless access points will be shown
here. You are able to left-click the mouse twice on the wireless access
points you want to connect.
Encryption: It shows whether the wireless access point has the
encryption or not. If the wireless access point does not have the
encryption,
“No” will be displayed here.
Signal: It shows the radio signal strength of the wireless access point.
ESSID
Input the ESSID of the wireless access point you wish to connect. When
you left-click the mouse twice on the wireless access points in the
access point list, its ESSID will be filled in this field automatically.
However, if the ESSID is not displayed (the wireless access point you
selected choose to hide its ESSID), you have to know its ESSID and
input it here, or you will not be able to connect it.
Password
It supports None, Open System, Shared Key 64bits and 128bits,
WPA-PSK and WPA2-PSK. Configure the setting consistent with the
setting on the wireless router/AP that this IP camera will join the wireless
network. Apply the settings and then check the wireless networking.
In the Open System /Shared Key, the IP camera only
supports WEP key 1. If the wireless access point is not using
key 1, please change it.
Network Type
Select the network type of wireless connection.
Infrastructure :Connect the IP camera to a wireless access point
Adhoc: This IP camera will become a stand-alone wireless network
point. Other wireless computers / devices can discover this IP camera
and connect to it without the wireless access point.
Domain
In some countries, the wireless rule might apply; please select it
according to your country.
Channel Number
Select the radio channel you wish to use here. When the network type is
‘Infrastructure”, the radio channel is auto-selected according to the
channel that wireless access point uses. You can only select the