PLANET ICA-W7100 - Manual (Page 13)

720P Wireless IR PT IP Camera
ICA-W7100
- 13 -
Restoring the factory default setting will lose all the
previous settings including IP address forever.
User needs to run the IP Finder II program to
search the device and configure it to let the device
work properly again.
Bracket hole
By connecting the bracket, you could fix the camera onto the
ceiling or wall. You could also put the camera on the table
directly.
2.2 Hardware Installation
1. Insert micro SD card.
If user needs to use the alarm recording function, please insert the micro SD/SDHC card
before powering on.
Please refer the
Appendix G: Micro SD Card Compatibility to select your micro
SD/SDHC card.