PLANET ICA-W7100 - Manual (Page 46)

720P Wireless IR PT IP Camera
ICA-W7100
- 46 -
3.7.3 IO Alarm Setting
Use this menu to specify the triggered conditions of digital I/O.
Alarm enable To enable or disable the Alarm service here.
Signal type
This trigger will be activated when digital input’s input signal is open
or closed (select from dropdown list).
Alarm Duration (S)
For example, if you set it as "10 sec", once the motion is detected and
action is triggered, it cannot be triggered again within 10 seconds.
Weekly
After completing the schedule, the camera will be triggered according
to the schedule.
Alarm Recording Send recording file (.avi) to SD card when the camera is triggered.
Alarm capture
Send JPG file to FTP server when the camera is triggered.
Sending Email Send message to e-mail server when the camera is triggered.
Alarm Output 1
Send signal to digital out when the camera is triggered.