PLANET ICA-W7100 - Manual (Page 21)

720P Wireless IR PT IP Camera
ICA-W7100
- 21 -
When you see the message, please click “Yes” to change the IP address.
z If user wants to set device as DHCP client, please refer to the steps below:
Step 1. Select an IP cam from the device list
Step 2. Check the “Enable DHCP” box
Step 3. Click “Generation”
Step 4. Click “Modify”
When you see the message, please click “Yes” to change the IP address.
Please make sure the IP address of PC is in the same subnet as device’s IP
address.