PLANET ICA-W7100 - Manual (Page 45)

720P Wireless IR PT IP Camera
ICA-W7100
- 45 -
3.7.2 Motion Setting
Use this menu to specify motion detection window and set the conditions for detection while
observing a captured image.
Alarm Enable To enable or disable the Alarm service here.
Sensitivity
Define the sensitivity value of motion detection. The higher value will
be more sensitivity.
Alarm Duration (S)
For example, if you set it as "10 sec", once the motion is detected and
action is triggered, it cannot be triggered again within 10 seconds.
Motion Detection Area
Click “ Motion detection area” to select the motion area
Select one region on the image, click “ Set” to save this setup.
Click “ Query” to check the selected masking region；
Click “ Delete All” to delete all Masking regions.
Or select one region, and click “ Delete Selected”.
Weekly
After completing the schedule, the camera will be triggered according
to the schedule.
Alarm Recording Send recording file (.avi) to SD card when the camera is triggered.
Alarm Capture
Send JPG file to FTP server when the camera is triggered.
Sending Email
Send message to e-mail server when the camera is triggered.
Alarm Output Send signal to digital out when the camera is triggered.