PLANET GS-5220-48T4X - Manual (Page 320)

Command Guide
Switch# configure terminal
Switch (config)# upnp ttl 8
4.2.224 username
Command:
username privilege password { encrypted |
none | unencrypted }
username Establish User Name Authentication
User name allows letters, numbers and underscores
privilege Set user privilege level
User privilege level
password Specify the password for the user
encrypted Specifies an ENCRYPTED password will follow
none NULL password
unencrypted Specifies an UNENCRYPTED password will follow
The ENCRYPTED (hidden) user password. Notice the
ENCRYPTED password will be decoded by system internally. You cannot directly use it as
same as the Plain Text and it is not human-readable text
Default:
None
Usage Guide:
To configure the Profiles of Username
Example:
To configure the Profiles of Username (Username: 1234, Password: 1234, Privilege Level: 15)
Switch# configure terminal
Switch (config)# username 1234 privilege 15 password unencrypted 1234
Press ENTER to get started
Username: 1234
Password: 1234
#
-320-