PLANET GS-5220-48T4X - Manual (Page 312)

Command Guide
4.2.213.8 spanning-tree link-type
Command:
spanning-tree link-type link-type { point-to-point | shared | auto }
spanning-tree Spanning Tree protocol
link-type Port link-type
auto Auto detect
point-to-point Forced to point-to-point
shared Forced to Shared
Default:
Point to Point
Usage Guide:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Example:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree link-type shared
4.2.213.9 spanning-tree mst cost
Command:
spanning-tree mst cost { | auto }
spanning-tree Spanning Tree protocol
mst STP bridge instance
instance 0-7 (CIST=0, MST1=1...)
cost STP Cost of this port
Cost range
auto Use auto cost
Default:
Auto
Usage Guide:
To configure the Path Cost of MSTI Port
Example:
To configure the Path Cost (321) of MSTI Port (MST 2)
-312-