PLANET GS-5220-48T4X - Manual (Page 287)

Command Guide
[ proto { | tcp | udp | any } ] [ sip { | any } ] [ dip { | any } ] [ dscp
{ | { be | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 |
af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | any } ] [ fragment { yes | no |
any } ] [ sport { | any } ] [ dport { | any } ] } | { ipv6 [ proto { | tcp |
udp | any } ] [ sip { | any } ] [ dip { | any } ] [ dscp { | { be | af11
| af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 |
cs4 | cs5 | cs6 | cs7 | ef | va } | any } ] [ sport { | any } ] [ dport { |
any } ] } } ] [ action { [ cos { | default } ] [ dpl { | default } ]
[ pcp-dei { | default } ] [ dscp { | { be
| af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 |
cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | default } ] [ policy { | default } ] } ]
qos Quality of Service
qce QoS Control Entry
update Update an existing QCE
action Setup action
dmac Setup matched DMAC
frame-type Setup matched frame type
interface Interfaces
last Place QCE at the end
next Place QCE before the next QCE ID
smac Setup matched SMAC
tag Setup tag options
Default:
None
Usage Guide:
To update the QCE
Example:
To update the QCE 1 (DMAC: Unicast, Action: Cos 0).
Switch# configure terminal
Switch (config)# qos qce update 1 dmac unicast action cos 0
-287-