PLANET GS-5220-48T4X - Manual (Page 307)

Command Guide
Default:
Disabled
Usage Guide:
To configure Trap event of SNMP
Example:
To configure Trap event (STP, RMON) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# traps switch rmon stp
4.2.212.9 version
Command:
version { v1 [ ] | v2 [ ] | v3 [ probe | engineID
] [ ] }
version Set SNMP trap version
v1 SNMP trap version 1
SNMP trap community
v2 SNMP trap version 2
SNMP trap community
v3 SNMP trap version 3
seucrity name
engineID Configure trap server's engine ID
probe Probe trap server's engine ID
Default:
Disabled
Usage Guide:
To configure Version of SNMP
Example:
To configure Version (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# version v2 planet
-307-