PLANET GS-5220-48T4X - Manual (Page 299)

Command Guide
4.2.207 snmp-server
Command:
snmp-server
snmp-server Set SNMP server's configurations
Default:
Enabled
Usage Guide:
To enable the SNMP Service
Example:
To enable the SNMP Service
Switch# configure terminal
Switch (config)# snmp-server
4.2.208 snmp-server access
Command:
snmp-server access model { v1 | v2c | v3 | any } level { auth | noauth |
priv } [ read ] [ write ]
snmp-server Set SNMP server's configurations
access access configuration
group name
model security model
any any security model
v1 v1 security model
v2c v2c security model
v3 v3 security model
level security level
auth authNoPriv Security Level
noauth noAuthNoPriv Security Level
priv authPriv Security Level
read specify a read view for the group
read view name
write specify a write view for the group
write view name
-299-