PLANET GS-4210-8P2S - Manual (Page 326)

User’s Manual of GS-4210 Series
to this multicast address.
 CRCAlignErrors: The number of CRC/alignment errors (FCS or alignment
errors).
 UnderSizePkts: The total number of frames received that were less than 64
octets long(excluding framing bits, but including FCS octets) and were
otherwise well formed.
 OverSizePkts: The total number of frames received that were longer than
1518 octets(excluding framing bits, but including FCS octets) and were
otherwise well formed.
 Fragments: The total number of frames received that were less than 64
octets in length (excluding framing bits, but including FCS octets) and had
either an FCS or alignment error.
 Jabbers: The total number of frames received that were longer than 1518
octets (excluding framing bits, but including FCS octets), and had either an
FCS or alignment error.
 Collisions: The best estimate of the total number of collisions on this
Ethernet segment.
 Pkts64Octets: The total number of frames (including bad packets) received
and transmitted that were 64 octets in length (excluding framing bits but
including FCS octets).
 Pkts64to172Octets: The total number of frames (including bad packets)
received and transmitted where the number of octets falls within the
specified range (excluding framing bits but including FCS octets).
 Pkts158to255Octets: The total number of frames (including bad packets)
received and transmitted where the number of octets falls within the
specified range (excluding framing bits but including FCS octets).
 Pkts256to511Octets: The total number of frames (including bad packets)
received and transmitted where the number of octets falls within the
specified range (excluding framing bits but including FCS octets).
 Pkts512to1023Octets: The total number of frames (including bad packets)
received and transmitted where the number of octets falls within the
specified range (excluding framing bits but including FCS octets).
 Pkts1024to1518Octets: The total number of frames (including bad packets)
received and transmitted where the number of octets falls within the
specified range (excluding framing bits but including FCS octets).
 Sample Interval Sample interval (1–2147483647)
 Sample Type The method of sampling the selected variable and calculating the value to be
compared against the thresholds, possible sample types are:
 Absolute: Get the sample directly (default).
326