1 multicast profile setting – PLANET GS-4210-8P2S User Manual
Page 190
User’s Manual of GS-4210 Series
4.7.7.1 Multicast Profile Setting
The Add Profile and Profile Status screens in
Figure 4-7-36
&
Figure 4-7-37
appear.
Figure 4-7-36 Add Profile Setting Page Screenshot
The page includes the following fields:
Object
Description
IP Type
Select IPv4 or IPv6 for this drop down list
Profile Index
Indicates the ID of this particular profile
Group from
Specifies multicast groups to include in the profile. Specify a multicast group
range by entering a start IP address.
Group to
Specifies multicast groups to include in the profile. Specify a multicast group
range by entering an end IP address.
Sets the access mode of the profile; either permit or deny.
- Permit
Multicast join reports are processed when a multicast group falls
within the controlled range.
Action
- Deny
When the access mode is set to, multicast join reports are only
processed when the multicast group is not in the controlled
range.
Buttons
: Click to add multicast profile entry.
Figure 4-7-37 IGMP/MLD Profile Status Page Screenshot
190