PLANET GS-4210-8P2S - Manual (Page 298)

User’s Manual of GS-4210 Series
4.12.2 LLDP Global Setting
This Page allows the user to inspect and configure the current LLDP port settings. The LLDP Global Setting and Config screens
in Figure 4-12-1 & Figure 4-12-2 appear.
Figure 4-12-1 Global Setting Page Screenshot
The page includes the following fields:
Object Description
 Enable Globally enable or disable LLDP function
 LLDP PDU Disable
Action
Set LLDP PDU disable action: include “Filtering”, “Bridging” and “Flooding”.
 Filtering: discrad all LLDP PDU.
 Bridging: transmit LLDP PDU in the same VLAN.
 Flooding: transmit LLDP PDU for all port.
 Transmission Interval The switch is periodically transmitting LLDP frames to its neighbors for having the
network discovery information up-to-date. The interval between each LLDP
frame is determined by the Transmission Interval value. Valid values are
restricted to 5 - 32768 seconds.
Default: 30 seconds
This attribute must comply with the following rule:
(Transmission Interval * Hold Time Multiplier) ≤65536, and Transmission Interval
>= (4 * Delay Interval)
 Holdtime Multiplier Each LLDP frame contains information about how long the information in the
LLDP frame shall be considered valid. The LLDP information valid period is set to
Holdtime multiplied by Transmission Interval seconds. Valid values are
restricted to 2 - 10 times.
298