5 lacp port setting – PLANET GS-4210-8P2S User Manual
Page 111
User’s Manual of GS-4210 Series
4.4.5 LACP Port Setting
This page is used to configure the LACP port setting. The LACP Port Setting screens in
Figure 4-4-10
&
Figure 4-4-11
appear.
Figure 4-4-10 LACP Port Setting Page Screenshot
The page includes the following fields:
Object
Description
Port Select
Select port number for this drop down list to set LACP port setting.
Priority
The Priority controls the priority of the port.
If the LACP partner wants to form a larger group than is supported by this device,
then this parameter will control which ports will be active and which ports will be
in a backup role.
Lower number means greater priority.
Timeout
The Timeout controls the period between BPDU transmissions.
Short will transmit LACP packets each second, while Long will wait for 30
seconds before sending an LACP packet.
Buttons
: Click to apply changes.
Figure 4-4-11 LACP Port Information Page Screenshot
111