7 rate limit – PLANET GS-4210-8P2S User Manual
Page 249
User’s Manual of GS-4210 Series
4.9.7.7 Rate Limit
After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement software transmission. The
DHCP Rate Limit Setting and Config screens in
Figure 4-9-42
&
Figure 4-9-43
appear.
Figure 4-9-42 DHCP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object
Description
Port
Select port for this drop down list
State
Set default or user-define
Rate Limit (pps)
Configure the rate limit for the port policer. The default value is "unlimited". Valid
values are in the range 1 to 300.
Buttons
: Click to apply changes
Figure 4-9-43 DHCP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object
Description
Port
The switch port number of the logical port
Rate Limit (pps)
Display the current rate limit
249