PLANET GS-4210-8P2S - Manual (Page 209)

User’s Manual of GS-4210 Series
4.8.5.2 Properties
The Voice VLAN feature enables voice traffic to forward on the Voice VLAN, and then the switch can be classified and
scheduled to network traffic. It is recommended that there are two VLANs on a port -- one for voice, one for data.
Before connecting the IP device to the switch, the IP phone should configure the voice VLAN ID correctly. It should be
configured through its own GUI. This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control
Setting/Status screen in Figure 4-8-22 & Figure 4-8-23 appears.
Figure 4-8-22 Properites Page Screenshot
fields: The page includes the following
Object Description
 Voice VLAN State STP feature
ress filter. Possible
Indicates the Voice VLAN mode operation. We must disable M
before we enable Voice VLAN. It can avoid the conflict of ing
modes are:
■ Enabled: Enable Voice VLAN mode operation.
■ Disabled: Disable Voice VLAN mode operation
 Voice VLAN ID hould be a unique VLAN ID in the system and
onfiguration if the value equal
etc.
The allowed range is 1 to 4095.
Indicates the Voice VLAN ID. It s
cannot equal each port PVID. It is conflict c
management VID, MVR VID, PVID,
 Remark CoS/802.1p Select 802.1p value for this drop down list
 1p remark emark Enable or disable 802.1p r
 Aging Time (30-65536
min)
The time after which a port is removed from the Voice VLAN when VoIP traffic is
no longer received on the port.
(\Default: 1440 minutes).
Buttons
: Click to apply changes.
209