PLANET GS-4210-8P2T2S - Manual (Page 313)

User’s Manual of GS-4210-8P2T2S
 Allocation mode
In this mode, the user allocates the amount of power that each port may reserve. The allocated/reserved power for each
port/PD is specified in the Maximum Power fields. The ports are shut down when total reserved power exceeds the amount
of power that the power supply can deliver.
In this mode, the port power is not turned on if the PD requests more available power.
4.15.3 Power over Ethernet Configuration
This section allows the user to inspect and configure the current PoE configuration setting as screen in Figure 4-16-1
appears.
Figure 4-16-1: PoE Configuration Screenshot
The page includes the following fields:
Object Description
 System PoE Admin
Mode Allows user to enable or disable PoE function. It will cause all of PoE ports to
supply or not to supply power.
 PoE Management
Mode There are six modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
 Classification mode: The system reserves PoE power to PD according to
PoE class level.
 Consumption mode: The system offers PoE power according to PD real
power consumption.
 Allocation mode: Users allow to assign how much PoE power to each port
and the system will reserve PoE power to PD.
 Temperature
Threshold Allows setting over temperature protection threshold value. If the system
temperature is overly high, the system will lower the total PoE power budget
automatically.
313