PLANET GS-4210-8P2T2S - Manual (Page 23)

User’s Manual of GS-4210-8P2T2S
■ 10/100/1000Base-T interfaces(Port-9 to Port-10)
LED Color Function
Lights: To indicate the link through that port is successfully established.
LNK/ACT Green
Blinks: To indicate that the switch is actively sending or receiving data over that port.
Lights: To indicate that the port is operating at 1000Mbps.
1000 Orange Off: If LNK/ACT LED is lit, it indicates that the port is operating at 10/100Mbps.
If LNK/ACT LED is off , it indicates that the port is link down.
■ 1000Base-SX/LX SFP interfaces (Port-11 to Port-12)
LED Color Function
Lights: To indicate the link through that port is successfully established.
LNK/ACT Green
Blinks: To indicate that the switch is actively sending or receiving data over that port.
Lights: To indicate that the port is operating at 1000Mbps.
1000 Orange Off: If LNK/ACT LED is lit, it indicates that the port is operating at 100Mbps.
If LNK/ACT LED is off, it indicates that the port is link down.
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-1-3 shows the rear panel of these Managed Switches
Rear Panel
Figure 2-1-3 Rear Panel of GS-4210-8P2T2S
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch’s power supply automatically adjusts
to line power in the range of 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electrical outlet and the power will be ready.
23