beautypg.com

10 poe setting, 1 power over ethernet powered device – PLANET FGSW-1816HPS User Manual

Page 79

background image

User’s Manual of FGSW-1816HPS

79

4.10 PoE Setting

Providing up to 16 PoE, in-line power interfaces, the FGSW-1816HPS PoE Switch can easily build a power central-controlled IP

phone system, IP Camera system, AP group for the enterprise. For instance, 16 camera / AP can be easily installed around the

corner in the company for surveillance demands or build a wireless roaming environment in the office. Without the power-socket

limitation, the FGSW-1816HPS PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.

PD Classifications

A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is

to provide information about the maximum power required by the PD during operation. However, to improve power management

at the PSE, the PD provides a signature about Class level.

The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input

voltages and operational modes.

A PD will return Class 0 to 4 in accordance with the maximum power draw as specified by

Table 4-10-1.

Class

Usage

Range of maximum power used by the PD

Class Description

0

Default

12.95 watts (or to 15.4 watts for AF mode)

25.5 watts (or to 30.8 watts for AT mode)

Mid power or High power

1

Optional

0.44 to 3.84 watts

Very low power

2

Optional

3.84 to 6.49 watts

Low power

3

Optional

6.49 to 12.95 watts (or to 15.4 watts)

Mid power

4

Optional

12.95 to 25.50 watts (or to 30.8 watts)

High power

Table 4-10-1 Device Class

4.10.1 Power over Ethernet Powered Device

3~5 watts

Voice over IP phones

Enterprise can install POE VoIP Phone, ATA and other

Ethernet/non-Ethernet end-devices to the central where UPS is installed

for un-interrupt power system and power control system.

6~12 watts

Wireless LAN Access Points

Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can

install the Access Point any where with no hesitation

10~12 watts

IP Surveillance

Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera

without limits of install location – no need electrician to install AC sockets.