PLANET FGSW-1816HPS - Manual (Page 74)

User’s Manual of FGSW-1816HPS
74
4.8.1 Link Aggregation Settings
This page allows configuring Link Aggregation Settings. The Link Aggregation Settings screens in Figure 4-8-2 appears.
Figure 4-8-2 LAG Setting Page Screenshot
The page includes the following fields:
Object Description

System Priority The Priority controls the priority of the port.
If the LACP partner wants to form a larger group than is supported by this device
then this parameter will control which ports will be active and which ports will be
in a backup role. Valid values are in the range 1 ~ 65535 .
Lower number means greater priority.
 Link Aggregation
Algorithm
Select load balance algorithm mode:
MAC Address Source : The MAC Address Source can be used to calculate the
port for the frame.
MAC Address Source & Destination : The MAC Address Source & Destination
can be used to calculate the port for the frame.
 Member Select port number for this drop down list to esatablish Link Aggregation.
 Status Indicates the LAG status operation. Possible statuses are:

Enabled - Start up the LAG manually.

Disabled - Shutdown the LAG manually.
 Type Indicates the trunk type.