PLANET FGSW-1816HPS - Manual (Page 35)

User’s Manual of FGSW-1816HPS
35
When firmware upgrade process is completed then the following screen appears, please press the “continue” button and
wait for system reboot. After device reboot then can use the latest firmware of the PoE Web Smart Ethernet Switch.
Figure 4-2-11 Firmware Update Web Page Screen
1. Recommend to use IE 8.0 or FireFox browser tools for firmware upgrade process.
2. Firmware upgrade needs several minutes. Please wait a while, and don’t power off
the PoE Web Smart Ethernet Switch until the update progress is complete.
4.2.6 Reboot
The Reboot page enables the device to be rebooted from a remote location. Once the Confirm button is pressed, user has to
re-login the Web interface about 60 seconds later. The Reboot Switch screen in Figure 4-2-12 appears and click to reboot the
system.
Figure 4-2-12 Reboot Switch Page Screenshot
Press “Confirm” button to reboot the PoE Web Smart Ethernet Switch. After device reboot completed, the Web login screen
appears and login for further management.
4.2.7 NTP Setting
NTP is an acronym for Network Time Protocol, a network protocol for synchronizing the clocks of computer systems. You can
specify NTP servers and set GMT time zone. The NTP configuration screens in Figure 4-2-13 .