beautypg.com

Fibre channel cabinet – Avago Technologies eXtremeRAID 3000 User Manual

Page 64

background image

SAF-TE

E-2

eXtremeRAID 3000 Installation Guide

Fibre Channel Cabinet

You will need to use a Fibre, High Speed Serial Data Connector (HSSDC),
cable to connect a fibre drive to either one or both of the external Fibre
connector(s) on the eXtremeRAID 3000 controller. Connect the other end of
the Fibre cable, with a 9-Pin DSUB connector, to other devices or to an
certified Fibre Channel Cabinet as required (for example, an SES external
drive cabinet).

Please see Figure 2-11 for an example of an HSSDC connector.

☛

Note

Be sure to use a Fibre Channel Cabinet for the Fibre
disk drives. Use only Fibre disk drives in your Fibre
Channel Cabinet.

Check the documentation that comes with your Fibre
Channel Cabinet for further information.

See also other documents in the category Avago Technologies Hardware: