Fibre drive preparation, Fibre drive preparation -17 – Avago Technologies eXtremeRAID 3000 User Manual

Page 39

Installation

Manual No. DB11-000033-00

2-17

Fibre Drive Preparation

To prepare the drives for installation, follow these steps:

1. Set up your Fibre Channel Cabinet according to the manufacturer’s

instructions.

☛

Note

Use only Fibre disk drives in your Fibre Channel
Cabinet.

2. Refer to the Fibre drive manual for specific information about drive

configuration settings.

3. Place the Fibre drives into your Fibre Channel Cabinet.

4. The Fibre Channel Cabinet usually handles Fibre ID addresses

automatically.