Avago Technologies eXtremeRAID 3000 - Manual (Page 46)

Global Array Manager (GAM) Client
3-6 eXtremeRAID 3000 Installation Guide
Global Array Manager (GAM) Client
The controller can be configured using Global Array Manager Client. GAM
Client can also be used from the server or a system client to monitor status
and verify data integrity of disks connected to the controller while the system
and disks are running.
For details on how to install and run GAM Client, refer to the Global Array
Manager Client Software Installation Guide and User Manual.
In Case of Problems
If problems are encountered during start-up, check the following (the SCSI
reference is to be considered for the internal SCSI channel only):
• Check cable length. This includes internal bus lengths in enclosures.
• Check SCSI cabling for loose connections, pin mismatches (make sure
pin 1 on the cable matches pin 1 on the connector), bent pins, and
damaged or crossed cables.
• Check termination (only applies to the one SCSI channel).
• Check SCSI IDs on the drives connected to the SCSI channel.