Avago Technologies eXtremeRAID 3000 - Manual (Page 38)

Connectors, Jumpers and LEDs
2-16 eXtremeRAID 3000 Installation Guide
Fibre Connectors, External
The external Fibre connectors are on the controller’s High Speed Serial Data
Connectors (HSSDC), as shown in Figure 2-10.
Figure 2-10. eXtremeRAID 3000 Controller External Connectors
The cables should have the HSSDC at one end to be attached to the
controller and either HSSDC or DB9 connector on the other end, depending
on the external Fibre devices. An illustration of an HSSDC is shown in
Figure 2-11.
Figure 2-11. Fibre Cable–HSSDC