Avago Technologies MegaRAID SATA 150-4 (523) - Manual (Page 9)

MegaRAID SNMP Configuration Guide 3-1
Copyright © 1998-2003 by LSI Logic Corporation. All rights reserved.
Chapter 3
SNMP Installation for
Windows NT 4x
This chapter describes the MegaRAID SNMP installation for Windows
NT 4x operating system, and includes these topics:
•
Section 3.1, “Introduction,” page 3-1
•
Section 3.2, “Install the SNMP Extension Agent,” page 3-1
3.1 Introduction
The MegaRAID SNMP Extension Agent is available on Windows NT 4x.
The SNMP extension agent files are:
•
Megasnmp.dll
•
Megaraid.tdf
•
Megaraid.mib
3.2 Install the SNMP Extension Agent
To install the SNMP Extension Agent on Windows NT4.x, follow these
steps:
Step 1. Click Start-> Settings-> Control Panel->Services.
Step 2. Scroll and locate SNMP Trap Services. If the SNMP Trap
Services is set to Started Automatic go to
step 7 . If not, go to
step 3 .
Step 3. Click Start->Settings->Control Panel->Network.
Step 4. Select SNMP Services.
Step 5. Click OK. A message window will open asking you for the NT
CD-ROM. Insert the CD-ROM and click OK.