Avago Technologies MegaRAID SATA 150-4 (523) - Manual (Page 8)

2-2 SNMP Installation for Windows 2000, 2003
Copyright © 1998-2003 by LSI Logic Corporation. All rights reserved.
Using Windows 2000 or 2003, you will need to change the permissions
to allow the SNMP Agent to read and write. Windows 2000 and 2003
have a default setting to read only.
Step 6. Go to Start->Control Panel->Administrative Tools-
>Services.
Step 7. Right-click SNMP Services and select Properties.
Step 8. Select the Security tab and click Edit and change to READ
WRITE.
Step 9. Click OK.
Step 10. Locate the MegaRAID Power Console Plus Package folder.
Step 11. Double-click setup.exe.
Step 12. Click the SNMP Agent icon and select “This feature will be
installed on local hard drive.”
Figure 2.1 Installing SNMP with Power Console Plus
Step 13. Click Next. The SNMP feature will be automatically added.