Chapter5 snmp installation for linux, 1 introduction, 2 install the snmp extension agent – Avago Technologies MegaRAID SATA 150-4 (523) User Manual
Page 13: 1 installing the snmp extension agent using .rpm, Chapter 5 snmp installation for linux, Introduction, Install the snmp extension agent, Installing the snmp extension agent using .rpm
MegaRAID SNMP Configuration Guide
5-1
Copyright © 1998-2003 by LSI Logic Corporation. All rights reserved.
Chapter 5
SNMP Installation for
Linux
This chapter describes the MegaRAID SNMP installation for Linux
operating system, and includes these topics:
•
Section 5.1, “Introduction,” page 5-1
•
Section 5.2, “Install the SNMP Extension Agent,” page 5-1
5.1
Introduction
The MegaRAID SNMP Extension Agent is available on Linux. The SNMP
extension agent files are:
•
Mrd.mib
5.2
Install the SNMP Extension Agent
The SNMP Extension Agent on Linux, has been released in two formats:
•
megasnmp.rpm
•
megasnmp.tar
use one of the following installation procedures.
5.2.1
Installing the SNMP Extension Agent Using .RPM
Step 1.
To install the MegaRAID SNMP Extension Agent, go to the
directory (or media) that contains the megasnmp.rpm file and
type the following command.
rpm -i megasnmp.rpm
The megasnmp agent will install the following files: