Avago Technologies MegaRAID SAS 8308ELP User Manual
Page 20

3-2
Novell NetWare Driver Installation
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
All utilities and ASPI drivers expect the MegaRAID driver to pass the
requests to the adapter.
3.2
Installing the NetWare Driver in a New NetWare System
Follow the instructions in the Novell NetWare Installation Guide to install
Novell NetWare in the server. Perform the following steps to install Novell
NetWare using the MegaRAID controller as a primary adapter:
Step 1.
Boot from Novell NetWare.
Step 2.
Follow the instructions on the screen until you reach the Device
Driver screen, which is used to modify drivers.
Step 3.
Select Modify, and press ENTER.
Step 4.
Select Storage Adapters on the Storage Driver Support screen,
and press ENTER.
Step 5.
Delete any existing MegaRAID adapter listings.
Step 6.
Press INSERT to add unlisted drivers.
Step 7.
Press INSERT again.
A path displays.
Step 8.
Press F3.
Step 9.
Insert the driver diskette into the floppy drive, and press
ENTER.
The system finds the .HAM driver.
Step 10. Press TAB.
Step 11. Select the Driver Summary screen, and press ENTER.
Step 12. Continue the Novell NetWare installation procedure.