Avago Technologies MegaRAID SAS 8308ELP - Manual (Page 15)

MegaRAID SAS Device Driver Installation User’s Guide 2-1
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
Chapter 2
Windows Driver
Installation
This chapter describes the installation of the following Windows
®
operating systems:
•
Windows 2000
•
Windows XP
•
Windows XP x64
•
Windows Server 2003 (x86)
•
Windows Server 2003 (x64)
•
Windows Vista
This chapter consists of the following sections:
•
Section 2.1, “Installing the Windows System Driver in a New
Windows System”
•
Section 2.2, “Installing or Updating the MegaRAID Driver in an
Existing Windows System”
Note: When you connect an Engenio
®
Shea JBOD to a SAS
RAID controller and boot up the system to a Windows
operating system, a message displays asking for a driver
for the Shea JBOD. You need to install the SES processor
in the Shea JBOD by pointing to the same location where
the MegaRAID
®
driver package is located, the file
Nodev.inf . The Nodev.inf file (in the driver package) has
the entries required to install the processor correctly. This
file supports the following enclosure IDs:
EnclosureLSILOGIC_____SYM3600-SAS and
EnclosureIBM-ESXSEXP3000_________.