Avago Technologies Syncro 9361-8i User Manual
Page 48
Avago Technologies
- 48 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide
October 2014
Chapter 2: Creating the Cluster
Creating the Cluster in SuSE Linux Enterprise Server (SLES)
10. Activate Csync2 by clicking Turn Csync2 ON.
This action executes chkconfig csync2 to start Csync2 automatically at boot time.
11. Click Finish.
The following window appears.
Figure 35 Cluster Setup on Conntrackd Tab
12. After the information appears, click Generate /etc/conntrackd/conntrackd.conf to create the configuration file
for conntrackd.
13. Confirm your changes and close the cluster module.
If you set up the initial cluster exclusively with the YaST cluster module, you have now completed the basic
configuration steps.
14. Starting at step
in this procedure, perform the steps for Node2.
Some keys do not need to be regenerated on Node2, but they have to be copied from Node1.