9 mount the nfs resource from the remote client – Avago Technologies Syncro 9361-8i User Manual
Page 39
Avago Technologies
- 39 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide
October 2014
Chapter 2: Creating the Cluster
Creating the Cluster in SuSE Linux Enterprise Server (SLES)
8.
Click Add Child Resource to the newly added NFS Export resource, and select the NFS Client resource created
earlier.
Figure 27 Add Service Group Dialog - NFS v3 Export
9.
Repeat steps
for each additional virtual drive.
2.3.9
Mount the NFS Resource from the Remote Client
Mount the NFS volume from the remote client by using the following command line syntax at the command line
prompt:
mount –t nfs –o rw,nfsvers=3 exportname:/pathname /mntpoint
For example, if the mount point is /root/t1, enter the following command:
mount -t nfs -o rw,nfsvers=3 192.168.1.200:/root/mnt/v1 /root/t1
2.4
Creating the Cluster in SuSE Linux Enterprise Server (SLES)