Avago Technologies Syncro 9361-8i - Manual (Page 31)

Avago Technologies
- 31 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide 
October 2014
Chapter 2: Creating the Cluster
Creating the Cluster in Red Hat Enterprise Linux (RHEL) and CentOS
2.3.6.2 Create an IP Address Cluster Resource
Perform the following steps to create an IP Address cluster resource:
1. Select the Resources tab on the Cluster Management window and click Add.
The IP Address dialog appears, as shown in the following figure.
2. Select IP Address from the pull-down menu.
3. Specify the address of the cluster resource in the IP Address field.
4. Specify any options needed for this resource in the Netmask Bites, Monitor Link, Disable Updates to Static
Routes, and Number of Seconds to Sleep After Removing an IP Address fields.
5. Select Submit.
This action creates an IP address cluster resource.
Figure 18 Add IP Address Resource to Cluster Dialog