1 unsupported drives – Avago Technologies Syncro 9361-8i User Manual
Page 19

Avago Technologies
- 19 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide
October 2014
Chapter 2: Creating the Cluster
Creating Virtual Drives on the Controller Nodes
The Create Virtual Drive Summary window appears, as shown in the following figure.
Figure 9 Create Virtual Drive Summary
11. Click Finish to complete the VD creation process.
12. Click OK when the Create Virtual Drive - complete message appears.
2.1.4.1
Unsupported Drives
Drives that are used in the Syncro CS 9361-8i and Syncro CS 9380-8e solution must selected from the list of approved
drives listed on the LSI website (see the URL in
Section 1.4, Hardware Compatibility
). If the MegaRAID Storage
Manager (MSM) utility finds a drive that does not meet this requirement, it marks the drive as Unsupported, as shown
in the following figure.
Figure 10 Unsupported Drive in MSM