Avago Technologies Syncro 9361-8i - Manual (Page 18)

Avago Technologies
- 18 -
Syncro CS 9361-8i and Syncro CS 9380-8e Solution User Guide 
October 2014
Chapter 2: Creating the Cluster
Creating Virtual Drives on the Controller Nodes
8. Select the Provide Shared Access option, as shown in the following figure.
NOTE If you do not select Provide Shared Access, the VD is visible only from
the server node on which it is created. Leave this option unselected if
you are creating a boot volume for this cluster node.
Figure 8 Provide Shared Access Option
9. Click Create Virtual Drive to create the virtual drive with the settings you specified.
The new VD appears in the Drive groups window on the right of the window.
10. Click Next to continue.