Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual

Page 94

Text mode
Original mode

AMPROBE

MULTITEST2000

ENTER/HOLD: to enable/disable the HOLD function (updating interruption) of the

displayed data. All the previous functions remain however available.
When the HOLD function is enabled, the word

HOLD

is displayed.

When this function is enabled it’s not possible to record or take an
energy measurement. This function is disabled during a recording or
an energy measurement.

MENU: to

enter

the

MENU mode and change the instrument settings (see

paragraph 8.1 and 8.2). It’s not possible to enter the configuration
MENU during a recording or an energy measurement.

START/STOP: to record the selected parameters according to the instrument’s

settings (see chapter 10).