Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual

Page 47

AMPROBE

MULTITEST2000

LOOP 05.06.01

Phase Sequence not
correct

123

FRQ =60.0HZ V1-2=391V
V2-3= 0V V3-1= 0V

NOT CORRECT

Message “LOW Voltage
Phase T”: means that
Phase T has a low voltage
value. Similar message for
Phase R and S.

In the

mode, if the

voltage of one or more
phase is too low, one or
more phases has a low
voltage the instrument
will show a screen
similar to the along side
displayed.

This result can be stored pressing the SAVE key twice (refer to paragraph 9.1).