Amprobe Multitest-2000 Continuity-Tester - Manual (Page 59)

AMPROBE
MULTITEST2000
7.1. ENVIRONMENTAL PARAMETER AND LEAKAGE CURRENT: REAL TIME
MEASUREMENT
This working mode allows real time measurement and recording of Environmental
Parameters and Leakage current
1. Press this key to choose "AUX" mode input.
2. Pressing this function key will change the measuring unit of the instrument's
input. The following possibilities will be displayed circularly:
- - - (Instrument's input disabled)
mA (Leakage current)
°C (Celsius Temperature)
°F (Fahrenheit Temperature)
HR% (Relative humidity)
m/s (Air Speed)
mV (Voltage)
LUX (20)
(Luminance: Full Scale 20Lux)
LUX (2k) (Luminance: Full Scale 2kLux)
LUX (20k) (Luminance: Full Scale 20kLux)
3. Connect the External probe or clamp to the I1 input.