Amprobe Multitest-2000 Continuity-Tester - Manual (Page 29)

AMPROBE
MULTITEST2000
6.1.3. Results of "AUTO" mode
LOW
Ω 05.06.01 Average resistance value
(Ravg)
Resistance values and
corresponding test currents
obtained after exchanging
the polarities of test leads
1.05Ω
R+ R-
1.07
Ω 1.03Ω
219mA 219mA
AUTO 0.11
Ω
FUNC CAL
At the end of the test, if
the average resistance
value Ravg is lower
than 5
Ω the instrument
emits a double sound
signal indicating the
positive outcome of
the test and displays a
screen similar to the
screen to the right.
The displayed result can be stored by pressing the SAVE key twice (refer to
paragraph 9.1).